Phase 2 of the European Astro Pi challenge begins!
ESA and its partners are happy to announce that more than 350 teams have been selected for the 2017 European Astro Pi challenge! These teams will now have the chance to compete to send their computer codes to the International Space Station (ISS).
The teams, representing 15 European countries, will soon receive their Astro Pi Kit directly at their school. They will start familiarising with the Astro Pi hardware and its sensors and will have to find a solution to the 2017 challenge: a mission assignment that ESA astronaut Thomas Pesquet prepared especially for them before being launched to the ISS earlier this month for his six-month ‘Proxima’ mission.
The teams will have until 28 February 2017 to submit their solutions. Up to five teams per country will then be selected for Phase 3 of the challenge: they will fly their computer codes to the ISS and run their Astro Pi mission in orbit during Spring 2017.
The 2017 Astro Pi mission assignment
The challenge will be composed of two missions that all participating teams will perform using Astro Pi:
- a primary mission, for which teams will write the code needed to respond to a specific task assigned by Thomas Pesquet, and
- a secondary mission, for which teams will come up with their own design of a scientific investigation and will write the computer code to execute it.
Note that Astro Pi is the only hardware you will have at your disposal to run your missions, and computer coding is your only tool. No other hardware or equipment is foreseen.
Thomas himself will install the Astro Pi on a multi-use bracket in the Columbus module and leave it there for the time of the challenge. Note that the Astro Pi cannot be moved from or around this fixed position, and that astronauts cannot be requested to operate it.
Primary mission: detect ISS crew members working in the Columbus module!
Every day, crew activities take place in the Columbus module, Europe’s space laboratory on the ISS. Astronauts spend a lot of their working day there, conducting several science experiments. At the same time, other space experts control and monitor the execution of these experiments from their offices on Earth.
Can you help these scientists understand if astronauts are present in the Columbus module at a certain time?
Your team’s primary mission is to write a code that will allow the ISS Astro Pi and its sensors to detect crew presence in the Columbus module.
Secondary mission: design your own Astro Pi investigation on the ISS!
On the ISS, Thomas will conduct many investigations, ranging from monitoring the space environment, to biology and technology demonstrations. The secondary mission of the 2017 European Astro Pi challenge is an investigation as well, consisting in having the teams design a science investigation, and where the scientific value will be of major importance, just like in Thomas’ mission.
Your team’s secondary mission is to design a science investigation which requires the exclusive use of the ISS Astro Pi and its sensors, and to write the code needed to execute it.
Ideas for the secondary mission have to be related to different aspects of life, work, and science onboard the ISS. If relevant, teams can use the idea that they already submitted when registering for Phase 1, or something completely different and new!
What you need to know: mission requirements and constraints
Both your primary and secondary missions will need to meet the following requirements and constraints:
- At least one sensor per mission has to be used;
- The LED matrix has to be used;
- Data has to be collected and stored with a timestamp for later analysis on the ground;
- Codes must be written in Python 3.4 or 2.7;
- The total time of execution for both the primary and secondary missions combined cannot be more than 3 hours.
Considering the busy schedules of the astronauts, the Astro Pi on the ISS will be controlled from the ground without the involvement of the crew. For this reason:
- Astronaut interaction with the Astro Pi trough the joystick and the buttons cannot be considered in your mission design and execution code;
- The Astro Pi cameras cannot be used;
- The Astro Pi cannot be moved from and around its fixed position in Columbus.
Keep these indications in mind when you design and prepare your missions to guarantee the feasibility of your investigations!
Astro Pi kit and classroom resources
All the teams selected to participate in Phase 2 of the challenge will soon receive an ESA-branded Astro Pi kit directly at their school. The kit contains the equipment necessary to test their codes, except for the monitor, USB keyboard, and mouse, which the teams will have to provide themselves.
Inside the Astro Pi kit you will find:
- a Raspberry Pi computer similar to the one present in the European Columbus module on the ISS,
- a Sense HAT that includes two cameras – although these cameras are not available for use in this year’s challenge,
- all the components you need to assemble your flight case (you will need access to a 3D printer). Assembling the flight case is optional.
The teams (students and teachers) can find the supporting resources (in English) here. These will help them explore and learn how to use the Astro Pi kit. This supporting material will soon also be available in French, Polish, Portuguese, and Italian. At the end of November, a video and an online education resource to demonstrate how to assemble the Astro Pi flight case will also be available in English.
How to submit your entries
The teams’ entries will have to be submitted in electronic form no later than 28 February 2017, 22:00 CET (Central European Time).
The entries must include a full description of both the primary and secondary missions, including a description of the mission objectives, of the procedure and methodology to be followed, and of the expected results, as well as the 2 computer codes written to execute both the primary and secondary missions.
Entries must be submitted in English (including any comment you may like to add within your Python code), except for the French and Portuguese teams that can submit their entries in their national language.
A document template as well as instructions on how and where to submit the entries will be published on this site on 12 January 2017.
The teams’ entries will be evaluated based on their:
- Scientific value,
- Creativity and originality,
- Feasibility of the missions within the ISS environment,
- Code readability and quality,
- Overall rigour, clarity, and comprehensiveness.
Thomas Pesquet and ESA, the ESEROs, the Raspberry Pi Foundation , CNES, and the UK Space Agency wish you the best of luck for the next three months of work!
If you have any questions regarding Astro Pi, please check the FAQ section in the Astro Pi website or join the Astro Pi forums. If you can’t find the answer you’re looking for, please send an email to email@example.com.
European Astro Pi Challenge 2016-2017 – Timeline
Launch of European Astro Pi Challenge
|Phase 1 – Registration and submission of Experiment Idea||4/10/16 – 13/11/16|
|Publication of supporting resources and Astro Pi guidelines||21/11/16|
|Selection of teams who presented best experiment ideas||16/11/16 – 24/11/16|
Announcement of selected teams and mission announcement
Distribution of Astro Pi kits to the selected teams
|Phase 2 - Discover the Astro Pi, design the experiment to accomplish the mission, write and submit your code||25/11/16 – 28/02/17|
|Deadline for submitting your experiment/code||28/02/17|
|Phase 3 – Best experiments/codes are selected and run on the ISS||1/03/17 – 15/05/17|
|Selection of the best experiment/codes to be run on the ISS||1/03/17 – 14/03/17|
|Announcement of the selected experiments/codes||15/03/17|
|Publication of the results (after the codes have been run on the ISS)||15/05/17|