ESA title
MSG-1: a close-up look at the satellite preparations in the S5 facility
Applications

MSG Launch Diary - week 6

365 views 0 likes
ESA / Applications / Observing the Earth / Meteorological missions / Meteosat

08 August 2002

We complete the electrical check and switch on the spacecraft after filling is completed successfully.

07 August 2002

We fuel MSG-1 with 365 kg of mono-methyl hydrazine.

05 - 06 August 2002

Filling the spacecraft with a nitrogen-tetroxide mix is finished with 603 kg of oxidiser.

02 August 2002

MSG in the clean room
MSG in the clean room

We prepare MSG-1 for fuelling with nitrogen tetroxide (MON-1) as the oxidiser.

01 August 2002

Helium tank pressurisation is completed, to 265 bar at 24.7 deg. C.

31 July 2002

We unload MSG-1 from its payload container and install it on the filling stand in the S5-A fuelling building.

30 July 2002

MSG in the clean room
MSG in the clean room

The satellite is installed in its payload container – the CCU2 (for Conteneur Charge Utile Ariane). We move the satellite from the S1-A building to S5-A fuelling building using a special transport.

The S5-A building is used for potentially dangerous operations involved in the preparation of bi-propellant spacecraft fuel. The transfer is done at night (19.30 to 22.00) to avoid the heat of the sun.

Break period: 02 – 29 July 2002

During this period, MSG-1 is in S1-A clean room. We charge the satellite's batteries every four days.

Related Links