| || || |
About CDFWhat is the CDF?What is concurrent engineering?The FacilityDesign Stations 1/2Design Stations 2/2Walk Through the CDFCDF history
MultimediaCDF imagesCDF Wallpaper (176 kb)Interactive posterCDF Presentation
Space Mission Operations – Designing for the Future
OPS-SAT Team at the end of the study
23 February 2012
As the computational power available both on Earth and on spacecrafts is growing, new ways of operating space missions can be implemented. The European Space Operations Centre (ESOC) in Darmstadt (D) is working towards that goal by developing new procedures and innovative software applications, continuously enhancing Europe’s capabilities and efficiency in space operations.
OPS-SAT is a small spacecraft designed by ESA CDF to provide a platform for in-orbit validation of these new concepts developed by ESOC. OPS-SAT will carry a number of experiments that will require a combination of changes to on-board and ground-software and will test methods for handling satellite data and operational processes that may be of use on other ESA missions. The focus of the mission design will be to implement software on off-the-shelf hardware. It will be very flexible, allowing ESOC experimenters to change every aspect of the on-board software in much the same way as one installs and changes operating systems and applications on a home PC. This means experiments that are not even imagined at launch can fly. The main experiments baselined are focused on testing the robustness of the new operation procedures and software applications along with high speed telecommunications. A four kilograms CubeSat form-factor was chosen to allow a fast and cost effective development cycle, equipped primarily with commercial off-the-shelf components.
The design activity was conducted inside ESA’s Concurrent Design Facility (CDF), usually used for ESA’s missions typically 500 times heavier. Although this spacecraft is small in size, the complexity remains incredibly high. OPS-SAT is the first CubeSat designed by ESA, integrating state of the art components (such as a miniaturised X-band transmitter from the PROBA missions) allowing it to provide unmatched performances, up to several hundreds times better than any other CubeSat flown before. The CDF and the supporting concurrent engineering environment were able to adapt successfully to this new type of application, providing tools and methodologies to enhance performances and reliability through architectural trade-offs. Fast iterations of the design process, helped by an updated concurrent engineering data model and rapid prototyping techniques allowed ESA to achieve a mission design that meets all the requirements.
OPS-SAT team members around the 1:1 scale model of the CubeSat
CAD drawing showing proposed OPS-SAT with solar arrays deployed
| || |