European Robotics under the spotlight


ERA during flat floor testing
 
European Robotic Arm (ERA) during flat floor testing
 
 
23 March 2006
 
PR 11-2006. The European Robotic Arm (ERA) will be delivered to Russia this summer in preparation for a launch to the ISS in 2007. ESA and Dutch Space have organised the European Robotics Media Day for 5 April to provide the media with the opportunity to become acquainted with ERA and the engineers behind this ambitious project.
 
After its launch in November 2007, the 11-metre long robotic arm will perform a variety of tasks outside the ISS. With the ability to move up to 8 tonnes of equipment, ERA will play a key role in the continued construction of the ISS and will be used to move experimental equipment to different external locations. In addition, ERA will be used to move astronauts and cosmonauts around during spacewalks and use its video cameras to carry out inspections of external space station surfaces. ERA therefore has an important role to play in the maintenance and scientific utilisation of the ISS.

These uses of ERA highlight the impact that robotics has on human spaceflight missions. Robotic equipment can be used to undertake certain work in the harsh environment of space that is not suitable or possible to be carried out by astronauts, and also assists astronauts in a range of tasks to help reduce the amount of time needed for spacewalk activities.
 
 
Detail of ERA's elbow joint
   
Detail of ERA's elbow joint
 
Along with the European Columbus laboratory and the Automated Transfer Vehicle (ATV), ERA is one of ESA's main contributions to the ISS. With its seven joints and an impressive concentration of tools and electronics, the robotic arm has the flexibility to move hand-over- hand between fixed base points around the Russian segment of the International Space Station in order to perform its tasks. This flexibility is added to by the fact that ERA can be operated from inside or outside the ISS and can be controlled either in real-time or pre-programmed.

The European Robotic Arm is a cooperative venture between ESA and the Russian Federal Space Agency, Roscosmos. The European Robotic Arm was built under an ESA contract by a consortium of 22 companies led by Dutch Space in the Netherlands.
 
 
ExoMars rover
 
Robotics also plays a leading role in the development of the ExoMars rover
 
 
Eurobotica
  
ERA is not the only European project in which robotics plays a leading role. In addition to the development of general robotics technology, ESA is currently developing the first European robotic rover to land on the surface of Mars. Scheduled for launch in 2011, this robotic rover forms a key element of the ExoMars mission, the flagship mission for ESA’s Aurora Exploration Programme.

There are also plans for a new intelligent space assistant for astronauts called Eurobot. With the help of a harness, called the Exoskeleton, astronauts will be able to use virtual reality to control Eurobot. These projects will also be highlighted during the Media Day on 5 April, which will also include a visit to the ExoMars and Eurobot test facilities at ESA’s Technology Centre, ESTEC.

Media representatives wishing to attend the event are requested to fill in and return the attached form.

For further information, please contact:

Dieter Isakeit
Head, Erasmus User Centre and Communication Office
Directorate of Human Spaceflight, Microgravity and Exploration
Noordwijk (The Netherlands)
Tel: +31 71 565 5451
Fax: +31 71 565 8008

Philippe Schoonejans
Head of the ERA Project Office (ERA Project Manager)
Directorate of Human Spaceflight, Microgravity and Exploration
Noordwijk (The Netherlands)
Tel: +31 71 565 5026
Fax: +31 71 565 4437
 
 
 Programme
  
European Robotics Media Day
Dutch Space – Newtonweg, 1 – Leiden, the Netherlands
Wednesday 5 April 2006
 
 
09:30Arrival at Dutch Space, Leiden, The Netherlands
10:00The European Robotic Arm and the International Space Station by Philippe Schoonejans (ESA)
10:20The European Robotic Arm ERA. What it does and how by Frank Meiboom (Dutch Space)
11:00Coffee break
11:15European Robotics Technology and R&Dby Gianfranco Visentin (ESA)
11:45Visit of the ERA flight model at the Dutch Space facility
12:30Lunch at Dutch Space
13:30Transport to ESTEC (optional)
14:00Visit to ESTEC (optional), comprising visits to the ERA training facility,
 the planetary terrain test bed (ExoMars), and the Eurobot telecontrol set-up
 
 

Related links

 •  Human Spaceflight and Exploration (http://www.esa.int/esaHS/index.html)
 •  International Space Station (http://www.esa.int/esaHS/iss.html)
 •  Automation and Robotics section (http://www.esa.int/techresources/ESTEC-Article-fullArticle_item_selected-12_6_00_par-30_1069167510658.html)
 •  Automation and Robotics (A&R) Laboratory (http://www.esa.int/techresources/ESTEC-Article-fullArticle_par-30_1069167511410.html)
 •  ERA - Dutch Space (http://www.dutchspace.nl/pages/business/content.asp?id=183 &LangType=1033)
 •  ExoMars (http://www.esa.int/esaHS/SEM1NVZKQAD_exploration_0.html)

For the media

 •  Attendance form (http://www.esa.int/esaCP/Pr_11_2006_p_EN.html)