ESAMechanismsSpace EngineeringMechanical
   
About
MechanismsMechanisms standard
Technology areas
Contactless power and data transfer
Dampers developmentDeployable BoomsElectrical MotorsElectric Propulsion Pointing Mechanisms (EPPM)High Accuracy Position and Scanning MechanismsHold-Down and Separation SystemsLaunch Vehicle actuatorsMicro Electro Mechanical SystemsMultibody DynamicsMulti-purpose Rotary and Linear ActuatorsSolar Array Drive Mechanisms (SADM)Sampling Devices for Planetary ExplorationTribology
Multibody and Advanced Simulation
Multibody & Advanced Simulation Team
Project support activities
Project support activities
Events
Events
Contact
Contact us
 
 
 
Bookmark and Share
 
 
 
 
 
printer friendly page
Contactless power and data transfer
 
Instruments that require the presence of scanning devices (e.g. microwave radiometers) or for general applications that require the transfer of information and/or power between parts in relative motion the usage of contactless solutions to transmit both power and data between parts is a technology of interest particularly for applications requiring long life. Depending on the scan rate and the expected life of the instrument, up to few hundreds millions of cycles can be expected. Slip ring devices are generally used for these purposes, but they can be subject to wear, degradation of performance, noise, production of debris, and leading eventually to device failure.
 
A Technology Research activity is currently in place with SEA and ESTL (UK) to realize a prototype of a device capable to fulfil the following main requirements and to transfer both power and data between two rotating parts.  
 
Objectives and main requirements:
 
The objective of this activity is to build a BBM and evaluate the performances of a long life contactless power and data transfer (LLCPD) device across a rotating scan mechanism.

The main requirements to be addressed are:

  • long life of the device (>130 million cycles);
  • efficiency of the power transfer (>95%);
  • performances during thermal cycling in vacuum (-40ºC / +60ºC);
  • low bit error rate (<10-9)
  • power transmitted 200 W

 
 
Section of the prototype of contactless power and data transfer device (SEA)
 
 
Last update: 18 January 2011
 


Related Links
ESR Technology / ESTL
 
 
 
   Copyright 2000 - 2011 © European Space Agency. All rights reserved.