|
|
European experiments back on Earth with successful conclusion of Foton-M2 mission 
The re-entry module of the Foton-M2 spacecraft, which has been in low-Earth orbit for the last 16 days made a successful landing today in an uninhabited area 140 km south-east of the town of Kostanay in Kazakhstan, close to the Russian border at 09:37 Central European Time, 13:37 local time. The unmanned Foton-M spacecraft, which was launched on 31 May from the Baikonur Cosmodrome in Kazakhstan, carried a European payload of 385 kg covering 39 experiments in fluid physics, biology, crystal growth, meteoritics, radiation dosimetry and exobiology. All de-orbit to landing procedures went according to plan beginning with the jettison of the Foton-M2 battery module three hours prior to landing. At an altitude of about 300 kilometres, travelling at 7.8 km/s and 30 minutes prior to landing, the retro-rocket situated on the Foton service module was fired for 45 seconds slowing the spacecraft down to reduce its altitude. The Foton-M2 service module was hereafter separated from the re-entry module and, as planned, burnt up in Earth’s atmosphere.
ESA representatives were on hand at the landing site to undertake initial procedures related to European experiments. This included immediate retrieval of the Biopan, Stone and Autonomous Experiments. The same team removed the FluidPac experiment facility’s digital tape recorder and configured FluidPac for safe transport to the TsSKB-Progress factory in Samara. The Foton capsule is currently being transported to Samara where the FluidPac facility and the Telescience Support Unit will be removed from the capsule and shipped to ESA/ESTEC in Noordwijk, the Netherlands. “I am extremely pleased that the majority of experiments have performed well.” said ESA’s Project Manager for Foton missions, Antonio Verga. “My thanks to the ESA Operations Team who has closely followed the mission from the Payload Operations Centre at Esrange in Kiruna, Sweden and our Russian counterparts at Roskosmos, TsSKB-Progress and the Barmin Design Bureau for General Engineering. The hard work and dedication of everyone involved has been crucial in making this mission a success and optimising the scientific returns from the mission”.
Fluid physics experiments were conducted in the FluidPac and SCCO experiment facilities. The data return from these was nearly complete and most of the scientific objectives were achieved. The BAMBI experiment produced some excellent images, a substantial role in which was played by the on-line processing capability of TeleSupport Unit.
The Agat furnace performed flawlessly as well. The processed samples should provide the material science community with good specimens to analyse. Unfortunately, the Russian Polizon furnace suffered a failure due to as yet unknown reasons, which prevented the processing of the semiconductor alloys stored in its drum at the required high temperatures.
Also numerous experiments attached to the outside of the Foton satellite were performed, which deal with space exposure and technology aspects. The European Space Agency has been participating in this type of scientific mission for 18 years and with a total of 385 kg of European experiments and equipment, this mission constituted the largest European payload that has been put into orbit.
"The Foton-M2 mission has been a resounding success and I look forward to seeing the positive impact the results of the experiments will have in the future,” said Daniel Sacotte, ESA’s Director of Human Spaceflight, Microgravity and Exploration Programmes. “I also look forward to building on this success with the Foton-M3 mission, which is planned to be launched in 2007.“
For more information on the Foton-M2 mission and the status of the ESA experiments: http://www.spaceflight.esa.int/foton
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
