ESA title
Hydrogen maser clock

Galileo technology developments

949 views 1 likes
ESA / Applications / Navigation / Galileo

Galileo satellite clocks

If you want to know precisely where you are, get an accurate clock. This was true in the seventeenth century, when sailors struggled to find a way of measuring longitude at sea. And it's equally true now, even though satellites have taken over from sextants, the sun and the fixed stars as the traditional navigation aids.

Seventeenth century navigators could estimate latitude from the position of the Sun, but to determine their longitude, they needed also to know the time at a fixed reference point, i.e. Greenwich, the location of the prime meridian. This is because local time moves forward or backward by one hour for every 15 degrees longitude one travels. The clocks available at the time where notoriously inaccurate at sea and the problem was solved only when John Harrison, a joiner from England, built a seaworthy clock that kept time to within about 1 second per day (about 500 meters in position accuracy). His clocks, which took him all his life to build, can still be seen at the Royal Observatory, Greenwich.

The clocks that will mark time for the next generation of navigation satellites will look very different from Harrison's elegant timepieces. Based on oscillations at atoms level, they are under development for Europe's Galileo satellite navigation system at the Observatoire de Neuchatel and Temex Neuchatel Time, both located in the centre of the Swiss clock industry. These clocks are being designed to a standard that seventeenth century sailors would find impossible to comprehend. They will keep time to within a few hundred millionths of a second per day.

Why, you may ask, would anyone want to keep time so closely? The answer has to do with the speed of light. Nowadays, you can determine your position on the Earth's surface by measuring the time taken for a signal broadcast by a navigation satellite to reach you. As signals travel at the speed of light, this means measuring tiny fractions of a second very accurately. And to do that, you need to know precisely when the signal left the satellite and precisely when it arrived at your receiver. "In navigation, clocks are the driving factor for the determining positions accurately. With an accuracy of better than one billionth second in one hour, the clocks on the Galileo satellites will allow you to resolve your position anywhere on the Earth's surface to within 45 cm," says Franco Emma, the clock expert and navigation engineer at ESTEC, ESA's technical centre in the Netherlands.

Each of the 30 satellites in the Galileo system will have two clocks on board, one based on the Rubidium atomic frequency standard and the other using a passive Hydrogen maser. Both clocks use different technologies, but make use of the same principle - if you force atoms to jump from one particular energy state to another, it will radiate the associated microwave signal at an extremely stable frequency.

Rubidium clock
Rubidium clock

This frequency is at around 6 GHz for the Rubidium clock and at around 1.4 GHz for the Hydrogen clock. "We will use the clock frequency as a very stable reference by which other units can generate the accurate signals that the Galileo satellites will broadcast" says Franco Emma. The broadcast signals will also provide a reference by which the less stable user receiver clocks can continuously re-set their time.

ESA has chosen the Rubidium and Hydrogen maser clocks as they are very stable over a few hours and because their technology can fly onboard the Galileo satellites. If they were left to run indefinitely, though, their accuracy would drift, so they need to be synchronised regularly with a network of even more stable ground-based reference clocks. These will include clocks based on the Caesium frequency standard, which show a far better long-term stability than Rubidium or Hydrogen maser clocks. "The clocks on the ground will also generate what we are calling Galileo System Time," says Franco Emma.

The clocks that will fly on the satellites are the first of their type to be developed and built in Europe. "Similar clocks are available in the US and in Russia (e.g. those flown on the GPS and GLONASS satellites), but we believe that we need to have an independent capability" states Franco Emma.

The passive Hydrogen maser clock will actually be the first one of its type ever to fly. It is being built by the Observatoire de Neuchatel in co-operation with Officine Galileo of Italy, the former being responsible for the overall development and in particular for the so-called physics package, the latter being in charge of the electronics. A similar arrangement applies for the Rubidium clock for which Temex Neuch√Ętel Time assumes overall responsibility and Astrium Germany contributes the electronics.

Both clocks will really show their capabilities in 2005, when the first experimental Galileo satellites will go on trial.

Related Links