Columbus operations

A view of the European Columbus laboratory installed in its new home on the International Space Station

Four days after launch from NASA's Kennedy Space Center on 7 February 2008, ESA's Columbus science laboratory was docked to the ISS. At 22:44 CET (21:44 UT) on 11 February 2008, NASA astronaut and ISS Commander Peggy Whitson together with ESA astronauts Hans Schlegel and Leopold Eyharts initiated final capture of the newly delivered module, firmly attaching it to the starboard side of the Node 2 module. From that moment on, Columbus has served as Europe's first permanent human outpost in orbit and Europe has become a full partner of the International Space Station (ISS).

The 1E Columbus mission carried 2.5 tonnes of ESA science payloads in five internal racks into space – Biolab, the Fluid Science Laboratory, the European Physiology Modules, the European Drawer Rack and the European Transport Carrier – housing integrated or modular multi-user research facilities.

A view of the European Columbus laboratory installed in its new home on the International Space Station

Within the first year of operation, additional facilities under NASA responsibility were moved into Columbus: the Human Research Facility and the Microgravity Science Glovebox, originally built in Europe. Two more payloads were carried separately in the cargo bay of the Shuttle and are now mounted on Columbus’s external platforms: the Solar observatory and the European Technology Exposure Facility. Other payloads will be added during future expeditions to the ISS.

Col-CC

Inaugurated in 2004 under contract from ESA, the Columbus Control Centre (Col-CC), located at the German Aerospace Center (DLR) facility in Oberpfaffenhofen, Germany, works closely with the other ISS control centres including Houston and Moscow. Under the call sign 'Munich', Col-CC is responsible for all Columbus systems and for European science activities on board the ISS. Col-CC control teams began their operational activities as a precursor to Columbus operations during ESA's Astrolab mission to the ISS in 2006.

ROLE Science laboratory with 10 International Standard Payload Rack spaces
LAUNCH DATE 7 February 2008
LAUNCHER/LOCATION Shuttle Atlantis STS-122 on ISS mission 1E/Kennedy Space Center, USA
LAUNCH MASS 10 275 kg (empty) 12 775 kg (mass at launch)
ORBIT Permanently docked with ISS since 11 February 2008
NOMINAL MISSION Forecast 10 years
+ State-of-the-art research facility and Europe's first permanent outpost in orbit +

Mission Operations Team

The primary mission of the Columbus Flight Control Team (FCT) is commanding, monitoring and controlling the Columbus module subsystems so as to support the astronauts working in space.

ESA Mission Director R. Ewald

The Flight Control Team consists of several engineers with individual specific tasks working under leadership of the on-shift Columbus Flight Director (COL FD). The COL FD is in direct contact with the flight directors at the other ISS Mission Control Centres (MCCs) in Houston and Moscow, with the Ground Operations and Engineering teams at Col-CC, and with ESA Operations Management. In Col-CC back rooms, planners and engineering support personnel stand by to support the FCT.

For crew medical matters, the COL FD is in contact with ESA's Crew Medical Support Office at the European Astronaut Centre (EAC), Cologne, Germany. EAC also dispatches the ‘Eurocom’ mission controllers to the Flight Control team, who maintain voice contact with the ISS crew and communicate all necessary information prepared by the FCT.

Beyond the daily operations activities at Col-CC, specific payload operations are the responsibility of the User Support and Operations Centres (USOCs) distributed throughout Europe, which, after receiving the 'Go' from Col-CC, can access their experiments in Columbus directly.

Overall, there are some 75 engineers, scientists, technicians and support personnel involved in Columbus operations at Col-CC. They are provided by our industrial partners as part of ESA's contract with EADS Bremen, with the German Aerospace Center (DLR) serving as the main subcontractor for the operations of Col-CC.

Four ESA Mission Directors (ESA MD) rotate on shift directing day-to-day operations to comply with ESA's predefined programme requirements. As single point of direction for the Flight Control teams, they have overall responsibility for Columbus operations and the last word on decisions.

ESA's lead MD for this team is Reinhold Ewald, an experienced astronaut who flew to the MIR space station with Soyuz TM-25 in February 1997, spending 20 days in space.

Mission operations overview

The three main tasks of Col-CC are:

  • Monitoring and control of Columbus systems as an integral module of the ISS
  • Coordination of the European experiment and payload operations on board the ISS
  • Operation of the communication infrastructure and communication links in Europe and with the international ISS partners

The main area of Col-CC comprises two flight control rooms, one planning room and four back rooms; there is a backup flight control room in a separate building for mission preparation.

Columbus Control Centre

One of the flight control rooms is used for actual operations, while the other is used for operations preparation, training and simulations (one of these rooms is shown in the image at the top of this page).

The control rooms are equipped with up to 14 console workstations, which allow direct access to the real-time status of all Columbus telemetry parameters as well as to data and video channels to and from the ISS.

Real-time operations are conducted 24 hours/day, 7 days/week with three daily shifts of 9 hours each. Shifts overlap by 30 minutes to enable in-person handover of critical information.

Columbus - daily operations

Each day, the Columbus module relies on resources provided from the ISS, such as power supply, thermal control and air regeneration. Therefore, a major focus of the Flight Control Team is ensuring acceptable conditions of the module's subsystems at all times.

Typical tasks for each day's shift in Col-CC include:

  • With the help of the Environmental Control & Life Support System (ECLSS), the flight control team monitors cabin air supply, air return lines, air ventilation, smoke detectors and the oxygen as well as CO2 content; temperature and water vapour concentration must be maintained in an acceptable range.
  • The power being supplied to the module by the ISS must comply with the operational needs of the Columbus subsystems and experiments, without exceeding maximum power consumption limits.
  • A lot of heat is generated by the systems and payloads in Columbus, which must be removed by water circulation and cooled by radiators mounted externally to the ISS. The System Engineer at Col-CC must ensure that one of two Columbus water pump assemblies is always running and that there is no leak in the pipes. The proper dissipation of heat via cold plates and ventilation must be carefully supervised.
  • Another flight control team engineer ensures that the correct configuration of data, video and voice communication links is maintained.
  • If any failure occurs, Columbus mostly relies on redundant systems for automatic back up; other actions may include switching off certain systems or stopping payload activities until the fault is diagnosed and fixed.
ESA Flight Directors work alongside DLR and industrial team mission controllers

All system anomalies or failures are analysed not only by the Flight Control Team but also by an Engineering Support Team (EST).

The EST comprises experts from the industrial partners that developed Columbus and its various module subsystems. For payload anomalies, the individual Science Centres lead the diagnosis and correction efforts. The Flight Control Team at Col-CC is responsible for coordinating and implementing the resulting corrective actions.

Columbus payload operations

In comparison to NASA and Russia, the European ISS infrastructure is much more decentralised and is based on nine Science Centres (USOCs) located in those European countries that contribute to ESA's Human Spaceflight Programme.

Depending on the scientific programme planned by the USOCs, Col-CC must integrate and coordinate activities to ensure that hardware, software, communications and astronaut time are all available as scheduled to perform the required experiments. Col-CC must also coordinate payload operations with the other ISS control centres.

Sitting at the Col-CC Operations console, the Payload Operations Coordinator (OC) is responsible for enabling a specific experiment's operation and for maintaining contact with the ISS Payload Operations Center, Huntsville, Alabama, USA, during experiments taking place in the US segment. For experiments in the Russian ISS segment, contact with MCC Moscow is established directly by the USOCs.

The nine USOCs are the contact points for the European scientists conducting experiments on the ISS. The USOCs support preparations and provide working places for the monitoring and control of the experiments.

Commands issued from the USOCs are transmitted via ESA's Interconnecting Ground Segment network (IGS) to Col-CC and thence to Houston and up to Columbus via NASA data relay satellites. The reverse channel is used to receive telemetry, video and scientific data from Columbus.

Space-ground telecommunications

On Earth, the ESA-owned European Interconnecting Ground Segment network (IGS) connects Col-CC with the other ISS control centres. This network must offer high reliability, which is the responsibility of the Col-CC controllers, who operate the network 24 hours/day in shift teams.

All communications between Col-CC and the ISS are first transmitted and received via NASA's MCC in Houston (for systems and telemetry data) and the ISS Payload Operations Centre in Huntsville (for scientific data). From there, signals are transmitted via NASA ground stations at White Sands, New Mexico, via NASA’s Tracking and Data Relay Satellite System (TDRSS), orbiting at an altitude of 35 000 km, to the ISS.

Last update: 8 December 2012

Copyright 2000 - 2014 © European Space Agency. All rights reserved.