ESAHomeEGNOSGalileoEvolution
   
Contents
Triangulation
Resources
Development Facilities
Multimedia
Image galleryVideo gallery
Archives
News archiveNavigation projects
Services
CalendarSubscribe
 
 
 
Bookmark and Share
 
 
 
 
Feature printer friendly page
How existing satellite navigation systems work
 
Positioning

Every second a satellite broadcasts a time-stamped signal giving its position. This is synchronised to an atomic clock and the signal reception is dated by an on-board clock. The time difference is then calculated and the difference, multiplied by the signal speed (300 000 km per second), gives what is called a pseudo-range.

The term pseudo-range is used because the distance in metres between the satellite and the receiver of the user is not calculated directly through space measurement but through a calculation made using the time measurement. The pseudo-range corresponds to the area where the vehicle or craft is situated.  
 
Triangulation
 
In theory, if the distance between a satellite and a receiver is measured, the range of possible positions of the receiver is anywhere on the surface of the globe within a radius centred on the satellite.

Measuring the distance to a second satellite narrows the possible position to anywhere on the intersecting curve. With three satellites and with reasonable assumptions the location can be narrowed to a single point.

In order to do this, however, the receiver needs to have an extremely accurate atomic clock. As these are very heavy and expensive, the signals of a fourth satellite are needed to reduce timing errors and to give a more accurate position fix.
 
 
Last update: 9 November 2001

 
 
More about...
Satellite navigation todayWhat is EGNOS?How does EGNOS work?EGNOS for Professionals
 
 
 
   Copyright 2000 - 2011 © European Space Agency. All rights reserved.