Microelectronics Development Methodology


ASICs (Application Specific Integrated Circuits) and FPGA (Field Programmable Gate Arrays) are now commonly used on-board spacecraft. On top of the normal constraints and tools for ASIC/FPGA developments, reliability and radiation tolerance are of particular concern in space applications, and therefore, specific design methods and tools and standards are required. Part of our work aims also at investigating methodologies from commercial chip development and COTS tools used therein.

 
 
ESA IP Core Technical Requirements
 
The objective of this document is to describe the technical requirements and the minimum set of deliverables expected, in order to allow a design to be reused as an “Intellectual Property Core”, or IP core. The main subject of this document is the “soft IP cores”, i.e. IP cores that are delivered to the Agency as synthesizable RTL HDL code. (pdf available)
 
 
The ECSS ASIC/FPGA Development Standard
 
In a joint initiative between ESA, Tesat and the European Cooperation for Space Standardisation (ECSS), and with participation from reviewers in European industry, a new ASIC/FPGA Development Standard has been elaborated, which shall become the reference standard for space developments. The latest version of the standard (ECSS-Q-ST-60-02C) was issued by ECSS in July 2008, replacing the previous version from July 2007 (ECSS-Q-60-02A). The standard is made available at this site. (pdf available)

The standard is also available for public download (in both PDF and DOC formats) from the ECSS website, in the "Space Product Assurance Standards" section (requires registration).
 
 
FT-UNSHADES
 
FT-UNSHADES is a test system dedicated to the study of Fault Tolerant Circuits and the measurement of the robustness of an ASIC netlist against soft errors. It is based on a proprietary method for inserting controlled modifications into the current state of the emulator device (Xilinx Virtex-II, XC2V4000, XC2V6000, XC2V8000) during execution time. Using this board and software, fault tolerance detailed analysis can be produced before IC fabrication. The project was designed and engineered by a team of researchers from the Electronics Engineering Department of the University of Seville under an ESA contract.
 
 
The SEUs Simulation Tool (SST)
 
The SEUs Simulation Tool (SST) is a set of Perl and TCL scripts which allow the injection of SEU-like faults into HDL and netlist simulations.
The Design Under Test (DUT) is analyzed, and a list of nodes is provided to the user. After user selection of a fault scenario, appropriate TCL "force" commands are generated for the simulator (ModelSim), which will then upset selected nodes of the design at the selected time during simulation. (pdf available)

  • Author : Daniel Gonzalez Gutierrez

    The tool is provided for free download under GPL licence. However, if you download and use this tool, please inform us by sending a mail to IpCoreRequest[at]esa.int and provide feedback/bugfixes to this same address. (zip file available)

    Feel free to also visit the SST page at University Antonio de Nebrija, containing release 2.0 (November 2006). (see "Related links").
     
     
    ASIC Design and Manufacturing Requirements
     
    This document is used for ESA technology development contracts to minimise development risks and avoid "unpleasant surprises" late in the development. This document forms one part of the inputs to the ECSS-Q-60-02A standard for ASIC development, officially published by the ECSS on July 17th, 2007.

    The final draft of the ECSS-Q-60-02 standard is available for download from this page. The official release of this standard (ECSS-Q-60-02A) is available for public download from the ECSS website, under the "Space Product Assurance Standards" section (requires registration). (pdf available)
     
     
    ASIC Design and Assurance Requirements
     
    This document represents the precursor of a specification of the same scope and objectives intended for issue within the ESA Procedures, Specifications and Standards, branch of Product Assurance and Safety (PSS-01 series). It establishes the basic requirements for the development of ASIC components, ASIC specific quality assurance requirements, prototype manufacture, testing and validation which are to be applied by ESA contractors and subcontractors. This document is referenced and complemented by the ASIC Design and Manufacturing Requirements.

  • Author: Ralf de Marino (pdf available)
     
     
     
    Last update: 20 May 2010


    Related documents

     •  ESA IP Core Technical Requirements (pdf) (http://microelectronics.esa.int/core/ESA_IP_Core_tech_guide.pdf)
     •  ECSS ASIC/FPGA Development Standard (ECSS-Q-ST-60-02C) (pdf) (http://microelectronics.esa.int/asic/ECSS-Q-ST-60-02C(31July2008).pdf)
     •  The SEUs Simulation Tool (SST), Functional description (pdf) (http://microelectronics.esa.int/asic/SST-FunctionalDescription1-3.pdf)
     •  ASIC Design and Manufacturing Requirements (pdf) (http://microelectronics.esa.int/asic/DesignReq.pdf)
     •  ASIC Design and Assurance Requirements (pdf) (http://microelectronics.esa.int/asic/ASICAssure.pdf)

    Related links

     •  European Cooperation for Space Standardisation (ECSS) (http://ecss.nl/)
     •  ECSS-Q-ST-60-02C web page (http://www.ecss.nl/forums/ecss/_templates/default.htm?target=http://www.ecss.nl/forums/ecss/dispatch.cgi/standards/docProfile/100671/d20081111132342/No/t100671.htm)
     •  FT-UNSHADES website (http://walle.us.es/ftunshades/)
     •  SST page at University Antonio de Nebrija (http://www.nebrija.es/~jmaestro/esa)

    Related tools

     •  The SEUs Simulation Tool (SST), Version 1.3, July 2004 (zip file) (http://microelectronics.esa.int/asic/SST1-3.zip)