Watch Otwiera się w nowym oknie Shop Otwiera się w nowym oknie
Otwiera się w nowym oknie Otwiera się w nowym oknie
[ MetOp ]
[ Earth Observation Programmes ]

Payload Module thermal control

08 STY. 2002 Data publikacji 4751 Wyświetlenia

Thermal control of the PLM is passive (i.e. radiators and MLI) and supplemented by heaters.

These are the main elements of the thermal control:

  • Multi-Layer-Insulation (MLI)

  • flexible Second Surface Mirror Radiators

  • thermal doublers to spread the heat of high dissipating units

  • black paint on inner side of PLM panels

  • hardware controlled heaters

  • software controlled heaters

  • monitoring thermistors

Hardware controlled heaters use thermostats and maintain minimum non-operating temperatures to allow immediate activation of the:

  • Payload Module Computer (PMC)

  • Thermal Control Unit (TCU)

  • Power Distribution Unit (PDU)

  • Power Control Unit (PCU)

Software controlled heaters are controlled by the PMC on the basis of thermistor readings and defined temperature limits. They are used for warm-up and for control of operational temperatures.

Most instruments have their own thermal control and are thermally de-coupled from the PLM structure. For the Advanced Very High Resolution Radiometer (AVHRR), High Resolution Infra-Red Sounder (HIRS) and the Search and Rescue Repeater (SARR) instruments, baseplate temperatures are controlled by the PLM.

Powiązane linki

[ MetOp ]
08 STY. 2002

Payload Module

The Payload Module (PLM) provides the main supporting structure for both the payload instruments and the payload support systems. Instrument sensors and antennae are mounted on the external panels, while most of the electronic units are accommodated inside the PLM.The accommodation of the large suite of instruments is a significant design driver for the overall PLM configuration. The PLM also houses all of the avionics necessary for power regulation and distribution, command and control, and the handling of scientific data.The Payload Module (PLM) is the main supporting structure for the complement of instruments and various deployable features. The internal design of the PLM allows these instruments to work optimally.
Przeczytaj artykuł
[ MetOp ]
08 STY. 2002

Payload Module structural support

PLM structural designThe MetOp PLM structural design concept is based on the Environmental Satellite (Envisat) and consists of a 'box' shape structure with a central cylinder as the main structural load path to the Service Module (SVM). The PLM structures can be categorised as being primary or secondary structural elements.
Przeczytaj artykuł
[ MetOp ]
08 STY. 2002

Payload Module thermal control

Thermal control of the PLM is passive (i.e. radiators and MLI) and supplemented by heaters.
Przeczytaj artykuł
[ MetOp ]
08 STY. 2002

Payload Module measurement data acquisition, handling, storage

On the MetOp spacecraft command and control is implemented separately to measurement data handling. This does not work for the American instruments inherited from the National Oceanic and Atmospheric Administration (NOAA). A dedicated NOAA Interface Unit (NIU) has therefore been implemented to adapt the NOAA interfaces to European standards.
Przeczytaj artykuł

bądź na bieżąco

Zapisz się do naszego newslettera, aby otrzymywać najnowsze wiadomości, aktualizacje misji i ekskluzywne materiały bezpośrednio do swojej skrzynki odbiorczej. Dowiedz się jako pierwszy o naszych nadchodzących projektach i przełomach.

Zasubskrybuj nasz newsletter Otwiera się w nowym oknie

We use cookies which are essential for you to access our website and/or to provide you with our services, enable you to share our website content via your social media accounts and allow us to measure and improve the performance of our website.

See our cookie notice