Researchers are already working on the technology that could underpin the next generation of Earth observation satellites. In a recent Early Technology Development activity funded by ESA Discovery, TeraSi AB built a proof-of-concept 448 GHz receiver front end, demonstrating that silicon micromachining has the potential to make radiometers cheaper and more compact.
The ever-growing fleet of Earth observation satellites provides us with the vital data we need for many applications, including forecasting the weather, monitoring climate change and responding to natural disasters. Later this year, we'll see the launch of MetOp-SG-B1, a polar-orbiting satellite carrying a suite of state-of-the-art instruments that will improve weather forecasts and extend climate records. Several of its instruments are radiometers that measure the intensity of electromagnetic radiation in the atmosphere at specific wavelengths. The Ice Cloud Imager, for example, is the first instrument of its kind to operate in both millimetre and submillimetre wavelengths, which means it can home in on large and small ice crystals, and water vapour.
Earth observation requires precision engineering
Building a radiometer to detect these high frequencies requires packaging each component (e.g. amplifier, filters) inside a gold-plated block with precisely machined waveguides that channel the signal onto the component. Waveguides need a cross-section comparable to the wavelength of the signal – in this case, less than a millimetre, engineered with micrometre precision. Each instrument therefore comprises a series of metal blocks joined together, which is heavy, bulky, and expensive to produce in large numbers.
However, recent advances in semiconductor technology have made direct detection above 100 GHz feasible, reducing the number of components required. And silicon micromachining enables precise fabrication of complex waveguide structures on silicon wafers. ESA Discovery recently supported the 'SPARK – Advanced Packaging for Scalable THz Radiometry' activity, in which Swedish company TeraSi AB demonstrated a proof-of-concept 448 GHz receiver front end using direct detection and silicon micromachining.
Moving from blocks to wafers
Medijsko okno
"Traditionally, packaging has been done with metal machining. It's like precision clockwork, but applied to electronics. We go from metal machining to silicon, with processes that come from the clean room," says Microwave Engineer Bertrand Thomas, ESA's lead for the activity.
The project replaced metal blocks with gold-plated silicon wafers, with waveguides etched onto each wafer. Wafers are then stacked together to build a receiver front end.
"Instead of screwing parts together, you bond thin layers," says Bertrand. "You stack silicon wafers, and the interfaces become much, much more compact."
Over the course of eighteen months, the SPARK activity moved the concept from TRL 2 to 3 – from an idea to a demonstrator with three functions: a flat antenna, a low noise amplifier and a bandpass filter. Tests showed that the antenna directed more than 75% of the signal power into the main beam and the amplifier provided a tenfold increase in signal power – more than 10 dB of gain. The filter was able to select required frequencies very precisely.
The activity was funded through ESA's Discovery Programme, which Bertrand likens to seed funding: short and low-cost, but enough to demonstrate a concept.
Looking ahead
The proof-of-concept demonstrator is just one step in the development process. The next stage is a larger Technology Development Element (TDE) activity, which would move towards TRL 4 or 5 over several years. It would develop the technology into a single-pixel system designed to be part of an array, while integrating more functions, such as additional filtering and back-end stages.
Another big advantage of the silicon micromachining process is that once a wafer has been designed, it can be mass-produced, bringing down costs. "Because it's a photolithographic process, if you make one, you can make 10 or 100 or even 1,000 of them at the same time," says Bertrand. "We have about five years before the instrument studies begin for the next generation of satellites, and we want this technology ready for that."
ostanite obveščeni
Naročite se na naše e-novice in prejemajte najnovejše novice, posodobitve misij ter ekskluzivne vpoglede neposredno v svoj nabiralnik. Bodite med prvimi, ki izvedo za naše prihajajoče projekte in preboje.