ESA title
A student CubeSat
Agency

ESA Cubs delivered for first Vega flight

14/11/2011 1865 views 1 likes
ESA / Education

The first CubeSats to be sponsored by ESA’s Education Office have been delivered to the agency’s Space Technology and Research Centre (ESTEC) in the Netherlands.

Integration of these 1 kilogram picosatellites into their deployment systems, named P-PODs (Poly-Picosatellite Orbital Deployer) and the associated testing was completed by mid-November.
They will now undergo a Final Acceptance Review and, if accepted for the flight, will be sent to the European Spaceport at Kourou, French Guiana, to be prepared for launch on the Vega Qualification Flight.

The ESA CubeSat programme began on 28 May 2007, when Antonio Fabrizi, the Director of Launchers, and René Oosterlinck, the Director of Legal Affairs and External Relations, signed an agreement to include an educational payload on the maiden flight of the Vega launch vehicle.

The announcement of opportunity issued by ESA's Education Office in February 2008 offered the possibility of launching up to nine university CubeSats free-of-charge on Europe's newest launcher.

This unique, hands-on, project is now coming to fruition with the integration of the picosatellites – dubbed the 'ESA Cubs' - into their P-PODs. The installation of the first three CubeSats was completed in the clean room at ESTEC on 28 October, with the participation of students and academic staff from the universities which provided the payloads. A second batch of three CubeSats was installed into their P-POD on 9 November.

Preparing for the first integration
Preparing for the first integration

The integrated and tested P-PODs are scheduled to be delivered to Kourou by the end of November. During the Vega launch campaign, they will be integrated onto the LARES (Laser Relativity Satellite) primary payload structure that will be assembled to the launch vehicle’s upper stage.

The ESA Cubs have been developed by more than 250 university students from six different countries over the last 4 years. Each CubeSat carries its own scientific or technology demonstration payload. The six CubeSats to be launched on Vega in late January 2012 comprise:

  • Xatcobeo (a collaboration of the University of Vigo and INTA, Spain): a mission to demonstrate software-defined radio and solar panel deployment;
  • Robusta (University of Montpellier 2, France): a mission to test and evaluate radiation effects (low dose rate) on bipolar transistor electronic components;
  • e-st@r (Politecnico di Torino, Italy): demonstration of an active 3-axis Attitude Determination and Control system including an inertial measurement unit;
  • Goliat (University of Bucharest, Romania): imaging of the Earth surface using a digital camera and in-situ measurement of radiation dose and micrometeoroid flux;
  • PW-Sat (Warsaw University of Technology, Poland): a mission to test a deployable atmospheric drag augmentation device for de-orbiting CubeSats;
  • MaSat-1 (Budapest University of Technology and Economics, Hungary): a mission to demonstrate various spacecraft avionics, including a power conditioning system, transceiver and on-board data handling.

A seventh CubeSat is planned to be delivered, installed in a third P-POD and tested during the next two weeks.

Preparing for the second batch
Preparing for the second batch

The ESA Cubs will be deployed from their different deployment systems mounted on the support structure of the main payload, LARES, into an orbit of 300 x 1450 km at an inclination of 69.5 degrees. They will have a natural orbital lifetime of up to 4 years, depending on their rate of orbital decay due to atmospheric drag.

Background

CubeSats are picosatellites of standardised dimensions (cubes of 10 cm per side, with a maximum mass of 1 kg) which can be operated from university or radio amateur ground stations. They are used as an educational tool that offers hands-on experience to aerospace engineering students in designing, developing, testing and operating a spacecraft system and its ground segment.

The P-POD systems are supplied to ESA by CalPoly (California Polytechnic State University, San Luis Obispo, Ca) in the United States, which is also supporting ESA in the integration and test campaign at ESTEC, as well as the launch campaign in Kourou.

The primary payload on the Vega inaugural flight is the spherical Laser Relativity Satellite, LARES, which is provided by the Italian Space Agency (ASI) and developed by industrial contractor Compagnia Generale per lo Spazio (CGS S.p.A.) in Milan. The accommodation of the CubeSats on the LARES payload structure was made possible by an agreement between ESA and ASI.

Related Articles

Related Links